Mechanical and electrical components of the elevator

For people who have movement problems or climbing stairs is a problem for them,
the elevator is a very important device and if the components of the elevator do not work properly, these people will have many daily problems.
>
Therefore, familiarity with this practical device is very important.

1# Elevator Components (Elevator Components)

Elevator is an Electro Mechanic device that
It is made of mechanical and electronic parts and components.

It is better to introduce them by separating the components of the elevator into these two categories.

Next, stay with us for the most important Examine the parts of the elevator.

Introduction to the main types of elevator

2# Elevator mechanical components

The mechanical components of the elevator are very important in the correct operation of the elevator.

If the mechanical components do not interact properly with the electrical components, the elevator will not work properly.

In this section, we will introduce the most important mechanical components.

1-2# cab or elevator chamber (Elevator Car)

Passengers board the cabin and move between floors through it.

Cabin Capacity strong> means the number of people who can fit inside the elevator cabin as a standard.

The capacity of the cabin should meet the needs of the residential or commercial complex.

2-2# Wire Cable (Elevator Cable)

Tow wire is a cable to which the elevator cabin is connected and has the task of bearing the weight of the elevator cabin and other components.

The type of this wire Usually Steel.

The tow wires are multi-stranded and designed to be highly resistant to wear and corrosion.

Usually 5 cables are used to move each cabin. >
If the main cables are broken, this cable will come into action and prevent accidents.

3-2# Elevator Balance Weight (Counterweight)

A balance weight is a weight that is installed on the left side of the elevator cabin and is connected to the towing wire.

The mass of the weight is equal to the weight of the elevator cabin plus half of the elevator capacity.

According to the standard, when calculating the capacity of the elevator, the weight of each person is considered to be 75 kg. For example, the capacity of a 6-person elevator is 450 kg. Elevator components are used.

A balance weight is placed inside a frame that controls the movement of the weight.